PoE 101

802.3af 1-port Power over Ethernet Injector

  • 1 Ethernet Input Port (Data Only) +
  • 1 Ethernet Output Port (Data + Power)
  • Bompliant withIEEE 802.3af
  • Smart Plug and Play

Download Datasheet

 

Introduction

PoE-101 is 1 Ethernet Input (data only) port and 1 Output (data + power) port Power over Ethernet Injector that is designed for small or medium network environment to strengthen its network connection. This product can convert standard 90~260V/AC power into low-voltage DC that runs over existing LAN cable to power up IEEE 802.3af compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3af compliant, or only the data will be sent through LAN cable. 

By adding PoE-101 to existing networking, installing networking products such as Access Points and IP cameras can be easily managed and set up. Wireless device deployments are easily located with available power outlets and network administrators don’t need to use heavy AC power adapters anymore.

 

No Special Networking Cable Required

By adding PoE devices, you can use an existing standard Cat-5 Ethernet cable to deliver both power and data where power source is dicult to obtain. It helps you reduce installation time and cost

 

Specification

Standards

IEEE-802.3af
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX

Features

Number of Ports:
1 EthernetInput (data only) Port
1 EthernetOutput (data + power) Port

Led Indicators

Per Port: PoE Act/Status
Per Unit: Power

Power Input

90~260V/AC, 50~60Hz

Power Output 

48V/DC at Full 15.4 WOutput Supported

Power Consumption

19 Watt (Max)

Dimensions

102 x 50 x 35 mm (L x W x H)

Weight

0.14 kg

Operating Temperature

0 to 40℃

Storage Temperature

-20 to 85℃

Humidity

10 to 90% RH (non-condensing)

Certifications

FCC Class A, CE, VCCI